MICROCIRCUIT DATA SHEET Original Creation Date: 08/16/95 Last Update Date: 02/25/98 Last Major Revision Date: 08/16/95 MDLM119-X REV 0C1 HIGH SPEED DUAL COMPARATOR General Description The LM119 precision high speed dual comparator is fabricated on a single monolithic chip. It is designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Furthermore, it has a higher gain and lower input current than other devices. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25 mA. Industry Part Number NS Part Numbers LM119 LM119E-SMD* LM119H-MLS LM119H-QMLV** LM119H-SMD*** LM119J-MLS LM119J-QMLV**** LM119J-SMD***** LM119W-MLS LM119W-QMLV****** LM119W-SMD******* LM119WG-SMD******** Prime Die LM119 Controlling Document See Features Page Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 Features - Two independent comparators. Operates from a single 5V supply. Typically 80nS response time at +15V. Minimum fan-out of 2 each side. Maximum input current of 1uA over temperature. Inputs and outputs can be isolated from system ground. High common mode slew rate. SMD : 86014012A*, 5962-9679801VIA**, 8601401IA***, 5962-9679801VCA****, 8601401CA*****, 5962-9679801VHA******, 8601401HA*******, 8601401XA******** Although designed primarily for applications requiring operation from digital logic supplies, the LM119 is fully specified for power supplies up to +15V. It features faster response than the LM111 at the expense of higher power dissipation. However, the high speed, wide operating voltage range and low package count make the LM119 much more versatile than older devices. 2 MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 (Absolute Maximum Ratings) (Note 1) Total Supply Voltage 36V Output to Negative Supply Voltage 36V Ground to Negative Supply Voltage 25V Ground to Positive Supply Voltage 18V Differential Input Voltage +5V Input Voltage (Note 3) +15V ESD Tolerance (Note 4) 800V Power Dissipation (Note 2) 500mW Output Short Circuit Duration 10 seconds Maximum Junction Temperature 150 C Storage Temperature Range -65 C to 150 C Lead Temperature (Soldering, 10 seconds) Thermal Resistance ThetaJA E Package (Still Air) E Package (500LF/Min Air flow) H Package (Still Air) H Package (500LF/Min Air flow) J Package (Still Air) J Package (500LF/Min Air flow) W Package (Still Air) W Package (500LF/Min Air flow) WG Package (Still Air) WG Package (500LF/Min Air flow) ThetaJC E Package H Package J Package W Package WG Package Note 1: Note 2: Note 3: Note 4: 260 C 89 63 162 88 94 52 215 132 215 132 C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W 5 31 11 13 13 C/W C/W C/W C/W C/W Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. For supply voltages less than +15V the absolute maximum input voltage is equal to the supply voltage. Human body model, 1.5K Ohm in series with 100pF. 3 MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 Recommended Operating Conditions Operating Temperature Range -55 C < TA < 125 C 4 MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V SYMBOL Icc+ Icc- Ileak Iib PARAMETER Positive Supply Current Negative Supply Current Output Leakage Current Input Bias Current CONDITIONS NOTES Iio Input Offset Voltage Input Offset Current Input Voltage Range MAX UNIT SUBGROUPS 11 mA 1 +Vcc = +15V 11.5 mA 2, 3 +Vcc = +15V -4.2 mA 1 +Vcc = +15V -4.5 mA 2 +Vcc = +15V -6 mA 3 +Vcc = 15V, -Vcc = -1V, Vgnd = 0V, Vout = 35V 1 1.8 uA 1 1 10 uA 2, 3 +Vcc = +15V 0.475 uA 1 +Vcc = +15V 0.95 uA 2, 3 2 0.475 uA 1 2 .95 uA 2, 3 Vcc = 5V, Vcm = 1V, Rs < 5K 2 -3.8 3.8 mV 1 Vcc = 5V, Vcm = 1V, Rs < 5K 2 -6.8 6.8 mV 2, 3 Vcc = 5V, Vcm = 3V, Rs < 5K 2 -3.8 3.8 mV 1 Vcc = 5V, Vcm = 3V, Rs < 5K 2 -6.8 6.8 mV 2, 3 +Vcc = +15V, Vcm = 12V, Rs < 5K -3.8 3.8 mV 1 +Vcc = +15V, Vcm = 12V, Rs < 5K -6.8 6.8 mV 2, 3 +Vcc = +15V, Vcm = -12V, Rs < 5K -3.8 3.8 mV 1 +Vcc = +15V, Vcm = -12V, Rs < 5K -6.8 6.8 mV 2, 3 2 -75 75 nA 1 2 -100 100 nA 2, 3 2 -75 75 nA 1 2 -100 100 nA 2, 3 +Vcc = +15V, Vcm = 12V -75 75 nA 1 +Vcc = +15V, Vcm = 12V -100 100 nA 2, 3 +Vcc = +15V, Vcm = -12V -75 75 nA 1 +Vcc = +15V, Vcm = -12V -100 100 nA 2, 3 Vcc = 5V, Vcm = 1V Vcc = 5V, Vcm = 3V Vi MIN +Vcc = +15V Vcc = 5V Vio PINNAME Vcc = 5V 2, 3 1 3 V 1, 2, 3 Vcc = +15V 3 -12 12 V 1, 2, 3 5 MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V SYMBOL Vsat Av CMRR PARAMETER Output Saturation Voltage Voltage Gain Common Mode Rejection Ratio CONDITIONS NOTES Vcc = 15V, Iout = 25mA, Vin < -5mV PINNAME MIN 1 MAX UNIT SUBGROUPS 1.5 V 1, 2, 3 +Vcc = 3.5V, -Vcc = -1V, Vin < -6mV, Isink < 3.2mA 0.4 V 1, 2 +Vcc = 3.5V, -Vcc = -1V, Vin < -6mV, Isink < 3.2mA 0.6 V 3 +Vcc = +15V, Delta Vout = 12V 4 10.5 K 4 +Vcc = +15V, Delta Vout = 12V 4 10 K 5, 6 Vcc = 5V, Delta Vout = 4.5V 2, 4 8 K 4 2, 4 5 K 5 2, 4 5.8 K 6 80 dB 4 +Vcc = +15V, Vcm = +12V DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcm = 0V. Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 ONLY. Icc+ Positive Supply Current +Vcc = +15V -1 1 mA 1 Icc- Negative Supply Current +Vcc = +15V -0.5 0.5 mA 1 Vio Input Offset Voltage Vcc = 5V, Vcm = 1V, Rs < 5K -0.4 0.4 mV 1 Note 1: Note 2: Note 3: Note 4: Vin > 8mV at extremes for Ileak and Vin < -8mV at extremes for Vsat (Vin to exceed Vos). 5 Volt differential across +Vcc and -Vcc. Parameter guaranteed by Vio and Iio tests. K = V/mV. 6 MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 Graphics and Diagrams GRAPHICS# DESCRIPTION 6142HRA2 LCC (E), TYPE C, 20 TERMINAL (B/I CKT) 8906HRB2 (blank) 9078HRB3 CERPACK (W), 10 LEAD (B/I CKT) 9641HRA2 (blank) E20ARE LCC (E), TYPE C, 20 TERMINAL(P/P DWG) H10CRF METAL CAN (H), TO-100, 10LD, .230 DIA PC (P/P DWG) J14ARH CERDIP (J), 14 LEAD (P/P DWG) P000182A CERDIP (J), 14 LEAD (PINOUT) P000196A LCC (E), 20 LEAD (PINOUT) P000197A METAL CAN (H), 10 LEAD (PINOUT) P000198A CERPACK (W), 10 LEAD (PINOUT) P000237A CERAMIC SOIC (WG), 10 LEAD (PINOUT) W10ARG CERPACK (W), 10 LEAD (P/P DWG) WG10ARC CERAMIC SOIC (WG), 10 LEAD (P/P DWG) See attached graphics following this page. 7 N/C 1 14 N/C N/C 2 13 N/C GND 1 3 12 OUTPUT 1 IN+ 1 4 11 V+ IN- 1 5 10 IN- 2 V- 6 9 IN+ 2 OUTPUT 2 7 8 GND 2 LM119J 14 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000182A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 N N N N MICROCIRCUIT DATA SHEET MDLM119-X REV 0C1 Revision History Rev ECN # Originator Changes 0B0 M0001371 02/25/98 Rel Date Barbara Lopez Added Power Dissipation - Note 2 in Absolute section. Renumbered all other notes. Archive MDS - MDLM119-X Rev. 0A0. Release MDS - MDLM119-X Rev. 0B0. 0C1 M0002726 02/25/98 Barbara Lopez Update MDS: MDLM119-X Rev. 0B0 to MDLM119-X Rev. 0C1. Added WG package to MDS. Added MKT outline, Burn-In CKT and Pinouts. 8